This 100mm Starter Kit Plus III with V6 Filter Holder, Enhanced Landscape CPL & 4 ND/GND Filters set from NiSi includes four filters that can be used individually or in various combinations to improve the results of your photography by preventing overexposure, as well as a circular polarizer to prevent distracting reflections or glare.

To allow these filters to be placed in front of a lens, this kit contains a V6 Pro 100mm Filter Holder that is designed to allow for the convenient use of up to three 100mm wide, 2mm thick filters along with the included circular polarizer.

A padded pouch is included for storage and transport, as well as an air blower, microfiber cleaning cloth, carbon-compound cleaning eraser, and a dust cap that can be used to protect the front surface of the circular polarizer while it is mounted on a lens.

The NiSi V6 Pro 100mm Filter Holder allows for the convenient use of up to three 100mm wide, 2mm thick filters along with an included NiSi 86mm Enhanced Circular Polarizer Filter. This aluminum alloy filter holder is pre-installed with three pairs of plastic filter slots, a configuration that accommodates three rectangular filters. Each slot is designed to grip an installed filter only along the surface of the filter's edges. Contact with a filter's front or rear-facing surfaces is avoided, particularly when using graduated filters, whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot.

The NiSi 86mm Enhanced Circular Polarizer Filter helps to reduce reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface. This results in a noticeable reduction of glare and reflections from non-metallic surfaces and an increase in the saturation of skies and foliage. It is also designed to provide a saturation effect that is approximately 25% greater than a NiSi 86mm Circular Polarizer for select NiSi filter holder kits. The enhanced circular polarizer filter is constructed from optical glass for clarity and features an aluminum alloy filter ring for durability while remaining lightweight.

The NiSi 100 x 150mm Nano Medium-Edge Graduated IRND 0.9 Filter is a rectangular filter that helps to darken specific areas of an image such as bright skies while allowing for a normal, unaffected exposure in the other regions of the image. The filter is densest at the edge and tapers to clear by the middle, with a medium-edged line of transition between the dense and clear areas. A neutral density filter with a medium-edged line of transition can filter the sky while minimizing its effect on the land. It is particularly useful for images that include elements like rooftops and mountains that protrude into the sky. Neutral density filters do not affect the coloration of the image and this filter provides up to a 3-stop reduction in light from entering the lens.

The Nano Hard-Edge Reverse-Graduated IRND 0.9 to 0.15 Filter from NiSi can be applied to darken bright skies, specifically during a sunrise or sunset, while allowing for a normal, unaffected exposure in the other regions of the image.

The NiSi 100 x 100mm Nano IRND 1.8 Filter is an ND filter with a 64x filter factor that provides a 6-stop exposure reduction. Its 1.8 density creates a darkening of the entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required. By slowing your exposure time or increasing your aperture, you can control the depth of field and convey movement more easily. Neutral density filters are intended to not affect the coloration of the image and are ideal for pairing with other filters.

The NiSi 100 x 100mm Nano IRND 3.0 Filter is an ND filter with a 1000x filter factor that provides a 10-stop exposure reduction. Its 3.0 density also creates a darkening of the entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required.

The NiSi 100mm Filter Pouch PLUS for 9 Filters is designed to provide a secure and convenient transport and storage solution for a combination of up to four NiSi 100 x 100mm and five 100 x 150mm filters. Filters placed within this pouch are each held within one of nine nonabrasive slots. They can be easily accessed by opening the pouch's touch-tab fastened front flap.

When photographing with a tripod, a loop along the rear of the NiSi 100mm Filter Pouch PLUS for 9 Filters allows it to be secured to one of the tripod's legs, putting your filters in more immediate reach. This pouch's exterior is woven from canvas for durability and a detachable strap provides the ability to carry it alongside or across the body.

NiSi V6 Pro 100mm Filter Holder:

Durable aluminum alloy filter holder provides three pairs of filter slots, a configuration that accommodates up to three separately available 100mm wide, 2mm thick filters.

Each slot is designed to grip an installed filter only along the surface of the filter's edges, avoiding contact with a filter's front or rear-facing surfaces

Use of the filter holder can be easily accomplished by first screwing the included 82mm adapter ring onto a lens with 82mm front filter threads

Included step-up rings allow 82mm adapter ring to be used with lenses that have 67mm, 72mm, or 77mm front filter threads

Additional step-up rings are separately available for lenses with 49mm, 52mm, 58mm, or 62mm front filter threads

Pull-and-release locking pin on filter holder allows for a reliable connection to the 82mm adapter ring, which allows the holder to be rotated 360°.

82mm adapter ring accommodates included NiSi 86mm Enhanced Circular Polarizer Filter and allows it to rotate for adjustment of its effect.

When combined, filter holder and 82mm adapter ring allow for easy installation or removal of the circular polarizer

Screw-in locking pin can be used to prevent any rotation of the filter holder, further securing the position of an installed filter

Additional adapter rings are separately available for lenses with 86mm or 95mm front filter threads.

NiSi 86mm Enhanced Circular Polarizer Filter:

Helps to reduce reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface

Polarizing filters arrange and filter directionally polarized light perpendicularly to the reflected light, allowing for the absorption of much of the light

Clears up haze in distant landscapes and provides more saturated, vivid colors

Offers a saturation effect that is approximately 25% greater than a NiSi 86mm Circular Polarizer for select NiSi filter holder kits

Strongest effect when used at a 90° angle from the sun

Circular polarizers are ideal for use with digital cameras and autofocus lenses where a linear polarizer will often disrupt auto exposure and focus features.

2.8x filter factor reduces exposure by 1.5 stops

Constructed from optical glass for clarity

Aluminum alloy filter ring for durability while remaining lightweight

NiSi 100 x 150mm Nano Medium-Edge Graduated IRND 0.9 Filter (3-Stop):

100 x 150mm graduated neutral density filter darkens bright areas of an image, such as skies, while leaving the remainder of the frame unaffected

8x filter factor provides up to a 3-stop reduction of light in selective areas

Medium-edged line of transition between the dense and clear areas

Useful for images that include elements like rooftops and mountains that protrude into the sky

Filter does not affect coloration of the image and is ideal for use with other filters

Each surface includes one layer of NiSi Optical Nano Coating that attenuates infrared light as well as visible wavelengths to maintain color neutrality and suppress color casts due to increased exposure times.

Nano coating provides an improved beading effect with water or oil for more efficient cleaning

Constructed from optical glass for clarity

NiSi 100 x 150mm Nano Hard-Edge Reverse-Graduated IRND 0.9 to 0.15 Filter (3 to 0.5-Stop):

Effectively darkens bright skies, specifically during a sunrise or sunset, while allowing for a normal, unaffected exposure in the other regions of the image.

3-stop band of density that tapers to a 0.5-stop density at the edge above it while directly above a clear area creates a neutral density pattern that matches the positioning of the sun when it is at or immediately above the horizon.

3-stop band of density extends approximately 4mm in both vertical directions

Density pattern corresponds to the brightness pattern of the sun when it appears at or is closer to the horizon as opposed to a higher angle, which creates an increase in brightness that is more prominent on both sides of the sun than above it.

Hard-edged line of transition between the 3-stop band of density and the clear area below it is useful for hard transitions between the sky and land.

3-stop to 0.5-stop gradation is applicable to multiple regions of brightness within the sky

Filter does not affect the overall coloration of the image

Each surface includes one layer of NiSi Optical Nano Coating that attenuates infrared light as well as visible wavelengths to maintain color neutrality and suppress color casts due to increased exposure times.

Nano coating provides an improved beading effect with water or oil for more efficient cleaning.

Constructed from optical glass for clarity

NiSi 100 x 100mm Nano IRND 1.8 Filter (6-Stop):

100 x 100mm neutral density filter darkens the image, allowing you to photograph with a longer shutter speed or wider aperture than normally required

Providing a 6-stop exposure reduction, this filter allows you to control depth of field and convey movement more easily

Filter does not affect coloration of the image and is ideal for use with other filters

Each surface includes one layer of NiSi Optical Nano Coating that attenuates infrared light as well as visible wavelengths to maintain color neutrality and suppress color casts due to increased exposure times.

Nano coating provides an improved beading effect with water or oil for more efficient cleaning.

Constructed from optical glass for clarity

NiSi 100 x 100mm Nano IRND 3.0 Filter (10-Stop):

100 x 100mm neutral density filter darkens the image, allowing you to photograph with a longer shutter speed or wider aperture than normally required.

Providing a 10-stop exposure reduction, this filter allows you to control depth of field and convey movement more easily

Filter does not affect coloration of the image and is ideal for use with other filters

Each surface includes one layer of NiSi Optical Nano Coating that attenuates infrared light as well as visible wavelengths to maintain color neutrality and suppress color casts due to increased exposure times.

Nano coating provides an improved beading effect with water or oil for more efficient cleaning

Constructed from optical glass for clarity

NiSi 100mm Filter Pouch PLUS for 9 Filters:

Designed to accommodate up to four NiSi 100 x 100mm and five 100 x 150mm filters

Nonabrasive, interior-lining

Detachable shoulder strap

When photographing with a tripod, the rear loop allows placement on one of the tripod's legs, putting filters in more immediate reach

Touch-tab fastened closure

manufacturer	NISI
Country of origin	‎Republic of Korea

NiSi 100mm Starter Kit Plus III with V6 and Landscape CPL